保定市路沿石模具厂

Slipform construction method of road edge stone

1 前言

1 Preface

随着我国高等级公路的飞速发展，全面推行机械化施工，是大势所趋，这对于提高施工质量，加快施工进度有着重要作用。预制法路缘石施工主要是把预制好的路缘石砌在路肩预挖的沟槽中。施工进度慢、工序多、占用场地大，路缘石的整体强度差、线条不顺畅。滑模施工法是采用路缘石滑模机在施工现场将新拌路缘石材料连续现浇．并密实成型．每天可铺筑1500m左右。滑模法铺筑路缘石速度快、所需人工少、不需要预制场地，铺筑的路缘石整体结构强度高、线型顺畅美观，倍受施工单位和业主的青睐。

With the rapid development of high grade highway in our country, it is the general trend to carry out mechanized construction in an all-round way, which plays an important role in improving the quality of construction and speeding up the construction progress. Prefabricated road curb construction is mainly made of precast curb stone in the trench excavated on the shoulder. The construction progress is slow, the process is much, the occupying site is large, the overall strength of the curb is poor, and the lines are not smooth. The slipform construction method is to use the slippery stone slipform machine to continuously pour the new curb stone material at the construction site, and to form it densely. It can lay 1500m every day. The sliding mode method has the advantages of fast speed, less manpower and no need for precast sites. The overall structure of the paved road stone is of high strength and smooth and beautiful line type. It is favored by the construction units and the owners.

2 工法特点

2 characteristics of industrial law

与先预制后安装方法相比，本工法能够提高路缘石内在的施工质量：路缘石强度高、平整度好、线形顺直、美观大方、整体稳定性好。同时加快施工进度缩短了工期，节省人力物力，能节约20-30%的成本。 节约能源消耗，经济效益也不错。

Compared with the prefabricated installation method, this method can improve the internal construction quality of the road edge stone: high strength, good smoothness, straight line, beautiful appearance and good overall stability. At the same time, speeding up the construction process shortens the construction period, saves manpower and material resources, and saves the cost of 20-30%. Energy consumption is saved and economic benefits are good.